[Next] [Previous] [Up] [Top] [Contents] [Back]

Chapter 3 Installation Procedures

3.5 Power Supply Considerations

The connectors P1 and P2 to the VMEbus serve several functions:

  • give strength to the board
  • connect the power supply pins of the VMEbus backplane
  • give access to the SCSI bus signals through the P2 connector
In addition to the Ground pins two power supply connections are used by the BI0316: +5Vdc and +12Vdc.

3.5.1 - +5Vdc Pins
3.5.2 - +12Vdc Pins
BI-0316 - Mass Storage Module - 6 DEC 1996 Copyright © 1996 Brand Innovators B.V. [Next] [Previous] [Up] [Top] [Contents] [Back]